♦ Reserved Grooves: with grooved xps with aluminum surface, it is easy to install heating pipes.
♦ High Strength: compressive strength≥1000kPa;
♦ High Strength XPS Extruded Foam Board: low thermal conductivity, great thermal insulation;
♦ Soaking Layer of Aluminium Film: high heat conducting efficiency. Heating pipes can transfer the heat up unilaterally by soaking layer;
♦ Soaking Layer of Aluminium Film has infrared reflection function; 
♦ Safety and Environmental Protection: B1 level combustion performance;
♦ Certification of 3 Star Green Building Material;

1.The ground must be flat and clear;
2. Tape the boundary strip;
3.Laying the Grooved XPS with aluminum board;
4.Install the pipes on the Grooved XPS with aluminum board;
5. Pouring and laying the concrete to make the floor surface to be flat,then install the wood floor or ceramic tile.

♦ Heat up fast;
♦ Reduce energy consumption;
♦ Light load;
♦ Province layer height;
♦ Fast construction;
♦ Low carbon emissions;
♦ Not easy to penetrate;
♦ Easy to repair;
♦ Holding temperature;
♦ Anti-condensation;
♦ Sound insulation;

XPS underfloor heating board works by providing a stable base for the heating pipes. The board is installed directly onto the subfloor, and the heating pipes are then installed on top of the board. The XPS foam insulation ensures that the heat is distributed evenly throughout the room, and it also helps to prevent heat loss through the floor. Feininger xps underfloor heating board is a perfect choice for floor heating system.

Here are some tips to keep in mind when installing XPS underfloor heating board:
♦ Ensure that the subfloor is clean and level before installation.
♦ Use a good quality XPS underfloor heating board
♦ Make sure to follow the manufacturer's instructions when installing underfloor heating system.
♦ Check the water pressure and flow rate of the system before installation.
♦ Make sure that the pipes are not kinked or twisted during installation.

When choosing an XPS underfloor heating board, there are several factors to consider, including:
♦ The thickness of the board
♦ The underfloor insulation R-value
♦ The type of underfloor heating system
♦ The size of the room

If you're experiencing problems with your XPS underfloor heating board, there are a few things you can check before calling in a professional:
♦ Check the water pressure and flow rate of the system
♦ Check for any leaks in the system
♦ Check the temperature of the water in the system

XPS underfloor heating board requires very little maintenance. However, it's important to inspect the system regularly to ensure that there are no leaks or damage to the pipes. If you do notice any problems, it's important to have them repaired as soon as possible to prevent any further damage to the system.